Express Econo-Lite Trailers

Standard Equipment

 Frame

  • Rectangle tubular steel construction - welded all four sides
  • Main frame runner 2 x 3 tubing ⅛" thick
  • Crossmember for 5 & 6 wide Z-member
  • Crossmember for 7 wide 2 x 2 tubing 14 gauge
  • Tube uprights 24" on center (1"x 1" & 1"x 2" 16 gauge tubing)
  • Heavy-duty single rear door 5 wide (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Heavy-duty split rear doors for 6 & 7 wide (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • V-nose style aerodynamic front design
  • Jig welded technology - frame, walls, roof, front & doors (complete trailer)
  • Frame is primed & painted black with oil base paint (electrostatic process)
  • 2" coupler - 5,000 lb rated
  • 2,000 lb tongue jack with sand pad/foot
  • 27" - 5,000 lb safety chains (Class III)

Running Gear

  • 2,990 lb Gross Vehicle Weight (GVW) - one 3,500 lb axle (Al-Ko brand)
  • Leaf-spring axle
  • Torsion drop axles - rubber/independent suspension
  • E-Z lube wheel bearings
  • 15" radial trailer tires, load range "C" (1 year No Questions Asked warranty)
  • E-coated white modular wheels (special priming process/rust prohibitive)
  • Stainless steel wheel caps

Exterior

  • LED tail & running lights (complete trailer)
  • All aluminum exterior (.030 gauge sheet)
  • White aluminum painted roof (approx. 15 degree difference in temperature from silver finish)
  • All exterior hardware is aluminum or stainless steel (hinges, hasp, cam bars)
  • Aluminum anti-racking cam bar on rear door/ramp
  • Aluminum brush Jeep fenders (.080 gauge)

Interior

  • 3/4" decking exterior grade, B/C finish (sealed underneath with oil base paint)
  • 3/8" sidewalls exterior grade, B/C finish
  • Interior dome light by each door
  • Heavy-duty split rear doors (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)

Optional Equipment


  • Rear ramp door with spring assist
  • Side door - 30", 32", 36", 40", 48" (1" x 1" 16 gauge steel tubing with 3/8" exterior plywood)
  • Side ramp door with spring assist
  • V-Nose style front design
  • Additional heights
  • Interior shelves (welded steel tubing to wall for strength, covered with 3/4" exterior plywood)
  • Roof vent (1" x 2" 16 gauged steel support frame)
  • Spare tire mount - lockable
  • Triple weedeater racks - lockable
  • Blower hooks & rack with tube holder
  • 12 exterior color choices
  • Aluminum diamond plate stoneguard 24" high
  • Aluminum diamond plate corner guards or polished aluminum
  • Aluminum roof ladder racks (1" x 2" tube 1/8" wall)
  • Aluminum wheels
  • Aluminum ceilings & walls with insulation
  • A/C 15,000/13,500 BTU Coleman brand - with or without heat strip or heat pump
  • E-track (welded to wall for strength)
  • Recessed floor ties with backing plate (4,000 lb capacity)
  • Wall ties (400 lb capacity)
  • Motorcycle chocks (removable)
  • Stabilizer jacks
  • Beaver/Dove tail
  • Electrical package - 110v
  • Single axle lbs - 5k, 6k, 7k,8k Gross Vehicle Weight (GVW)
  • Concession awnings
  • RV awnings roll-out style
  • Interior fenders

Available in :


Single Axle


Tandom Axle